What does this code mean?
The washing water heating system reports a fault.
The manufacturer documents this code in its support material, but that does not mean every model uses it identically. Check the complete model label and user manual.
Read the official manufacturer pageWhat can you try safely?
Manufacturer source describes the code; safe checks are explained separately. The manufacturer manual for your exact product takes precedence.
- 01
Confirm the code and model
Write down the exact code E60 and your full AEG model number. Do not apply this guide to a different appliance type.
How to interpret the result: A correct model/code match prevents false diagnoses.
- 02
Step 2: Safe check
Record E60 and avoid repeatedly running hot cycles while heating is faulty.
How to interpret the result: Do not force the machine to run if damage, leaks, burning smells or persistent faults are present.
- 03
Step 3: Next check
AEG recommends a one-minute power-off reset when it is safe and dry. Stop if the code returns.
How to interpret the result: Do not force the machine to run if damage, leaks, burning smells or persistent faults are present.
- 04
Step 4: Next check
Do not open heaters or make live electrical measurements. A technician must identify the failed component.
How to interpret the result: Do not force the machine to run if damage, leaks, burning smells or persistent faults are present.
How is this actually resolved?
The official source identifies the error family. The failed part cannot be identified from the code alone; symptoms and the exact model are important.
Practical actions at home
- Record E60 and avoid repeatedly running hot cycles while heating is faulty.
- AEG recommends a one-minute power-off reset when it is safe and dry. Stop if the code returns.
- Do not open heaters or make live electrical measurements. A technician must identify the failed component.
Professional repair: what is checked?
A technician checks the heater, temperature sensor, wiring and control relay and repairs only the confirmed failed component.
How do you know it is resolved? A supported cycle should complete safely without the code returning.
Important: Safety and warranty: Never open energized wiring, sealed refrigerant systems or electronic boards. Unauthorized repairs may affect warranty coverage depending on the warranty terms and applicable law. A certified technician is required for hazardous work.
Possible causes and important distinctions
The official source identifies the error family. The failed part cannot be identified from the code alone; symptoms and the exact model are important.
- Isıtma sistemi hatası
- Kod tek başına hangi parçanın bozuk olduğunu kanıtlamaz.
Do not bypass safety devices or attempt internal electrical or refrigerant repairs.
Check the exact model number
The manufacturer documents this code in its support material, but that does not mean every model uses it identically. Check the complete model label and user manual.